We apologize for not having an update on Project Silverstone last month. As you may know, modifying cars rarely goes according to plan!
This isn’t to say we had a major issue with our ’03 VW GTI, but some tasks take longer than expected. After all, perfection takes time and we want the best for our cars.
For the last five weeks, the car’s been in the care of 034Motorsport in Fremont, CA. They’ve been developing a new transverse 1.8T turbo kit, using Silverstone as a test mule.
When finished, the kit will fit all Mk4 Golf, GTI and Jetta 1.8T, as well as the Audi TT. Don’t get us wrong, there are already big-turbo kits on the market but we liked what 034 had planned. Instead of utilizing a top-mount location, exposing the turbo in the engine bay, they wanted to design a stealth package that retains the factory turbo location close to the firewall. This way, if somebody asks you to open the hood, everything looks normal…
In et 4/11, we previewed the major components for the kit – a Garrett GT2871R turbo and 034’s high-nickel content cast manifold. The turbo is a dual ball-bearing eliminator-style unit that features an internal wastegate and is much larger than the factory K03. The manifold showcases a long-runner design for optimum flow but is engineered to look OEM.
As you can see, 034’s manifold keeps the turbo hidde
With the parts temporarily bolted to the engine, 034 noticed the heater core caused clearance problems. The plastic plumbing would need to be cut and re-routed in order to make room for the turbo – no easy job since the intake manifold had to be removed for access. Then, 034 trimmed one of the lines and are in the process of creating a durable silicone hose set as a replacement for the rest of the lines.
Another hurdle was the brake lines below the air intake. A line protruded about 2" too far, preventing the turbo from mounting properly. So 034 sourced a banjo fitting to make it shorter.
With these barriers gone, the intake pipe and exhaust downpipe were next. 034 fabricated a 3" inlet pipe from aluminum that’s considerably larger than our original Samco part. While the piece in our kit is metal, the production part will be constructed from silicone.
The inlet pipe will mate to a larger MAF housing from the 225hp Audi TT. The MAF itself will bolt to the airbox and we have the option of retaining our cold-air intake or going back to the factory airbox. For stealth purposes, we’ll probably revert to the stock airbox…
034 designed the kit so you can retain the existing downpipe. Since we had a Techtonics 2.25" downpipe, 034’s new adapter will allow it to mate to the turbo. The flanges for the adapter were being machined during our visit, so we’ll show you these next time.
Once all the mechanical elements are finalized and bolted up, 034 will be putting everything into production and together we will address the fueling and tuning.
Although this is our sixth update for Project Silverstone since et 12/10, don’t be alarmed if you missed an issue. Each one can be found online at eurotuner.com.
For more airflow, 3
Our GTI started at Raven Motorsport where we disassembled the motor and rebuilt the bottom-end with a two-liter stroker kit from Integrated Engineering. From there, 034 got us ready for more power with an AEB head updated with enlarged ports, oversized valves and an Autotech intake cam.
When the motor was finished, we drove to 034 to set a baseline dyno of 203.8whp. To read up on Project Silverstone, visit eurotuner.com
The downpipe adapter before the flanges were machined
The metal inlet pipe was mocked up, but a silicone pipe will be included in the final kit
The GT2871R turbo before fitting
42968 Osgood Rd Ste I
1324 West 16th Street
2125 S. West Engineering
Salt Lake City