 The sway bar should now come...  The sway bar should now come out. You'll need to transfer the bushing brackets to the H&R bar. Simply pull off and push onto the new bar |  Now you're ready to install...  Now you're ready to install the bar. Position the bar for installation |  Install the H&R rear bar to...  Install the H&R rear bar to the chassis by securing the bushings as above. The H&R bar has two settings, with the softest being the outer holes |
 Finish the job by securing...  Finish the job by securing the end-links |  Here's a final look at the...  Here's a final look at the rear sway bar installed |  To remove the front sway bar,...  To remove the front sway bar, remove the 16mm bolt connecting the end-link to the bar |
 Then remove two 13mm bolts...  Then remove two 13mm bolts from the bracket securing the sway bar bushings. Repeat on the other side and the sway bar is free |  With the front sway bar removed,...  With the front sway bar removed, transfer the bushing brackets to the H&R bar |  The factory brackets simply...  The factory brackets simply push onto the H&R bar and will be secured on the car |
 Now install the bar. Fasten...  Now install the bar. Fasten the 13mm bolts that connect the bushing brackets to the chassis. |  Then, use the 17mm bolts provided...  Then, use the 17mm bolts provided by H&R to secure the end-links | |