eurotuner Magazine Homepage Eurotuner

Project M3 Sensor Clip

Prev  Next
Project M3 Sensor Clip
Project M3 Part 6 - Chasing the Pony
Remove the throttle position sensor clip: With a screwdriver, undo the traction control boot and pull it back. You can now access the 10mm bolts securing the throttle body. If your car still has the coolant lines attached to the throttle body, remove these by prying off the single-use clamps with a screwdriver. We capped the coolant lines from the motor in Part 2 to avoid increasing throttle body temps View Related Article
Project M3 Front View Project M3 Stock Exhaust Project M3 Cat Back Exhaust And Catalyric Converter Project M3 Photo Project M3 Rsc36 Installed Project M3 Uuc Underdrive Project M3 Uuc Underdrive Pulleys
Project M3 Riot Racing Obd2 Project M3 Sensor Clip Project M3 Throttle And Cruise Control Cables Project M3 Cable Removal Project M3 O Ring Gasket Project M3 Throttle Position Sensor Project M3 Plugging Tps Sensor
Project M3 Ignition Coils Project M3 Ignition Coil Plugs Project M3 10Mm Bolts Project M3 Bavarian Ignition Coils Project M3 Dyno Car
Mercedes Benz CL Research
Mercedes Benz CL Get updated on all your car buying needs from safety features, to specs, to crash test ratings and options. Get all the information you need if you are interested in buying a new car like the Mercedes Benz CL. Compare the CL with other submodels and find all you need for your car buying needs. It has a 8 star frontal impact rating for the driver and a 8 star frontal impact rating for the passenger. Other similar vehicles are the Porsche Boxster and the Audi TT.
Get Adobe Flash player