eurotuner Magazine Homepage Eurotuner

P86645 Image Large

Prev Next
Place the Eibach spring and strut onto the car and connect the top bolts. Tighten the lower bolt to the strut body, as this will secure the rotor in place and the caliper, if removed, can now be reattached. Reconnect the bracket holding the brake line, brake pad sensor, and ABS sensor, but do not reconnect the sway bar end link if you will be replacing the sway bars, too.
Sweet and Low

Place the Eibach spring and strut onto the car and connect the top bolts. Tighten the lower bolt to the strut body, as this will secure the rotor in place and the caliper, if removed, can now be reattached. Reconnect the bracket holding the brake line, brake pad sensor, and ABS sensor, but do not reconnect the sway bar end link if you will be replacing the sway bars, too.  View Related Article

 

Get Adobe Flash player