Install Nitrous on your New Beetle
We fished the main wire harness through the firewall. As a lift was unavailable to us the installer squeezed underneath the car in order to complete some of the final touches before we moved to the interior of the car. While deep under the car, he tapped into the oxygen sensor, attached a splice connector to the main wire harness, and ran the hose for the nitrous bottle. He secured the steel braided hose by attaching it to the undercarriage of the vehicle using high-tensile-strength zip ties. The hose was connected to the input side of the valve assembly and also run through a grommet in the trunk.
View Related Article
|
|